With a typical contour form as follows:
This structure is often used in practice, we looked outside to see the vertical and horizontal dividing bars of the frame face up with glass, face up this system can be used for buildings and as the lower floors with high security, you can also create different colors between the bar and out of the surface profile of the building, which makes a variety of colors to your work. The problem of this system is its ability to insulate between the two environments inside and outside the us solve by the use of insulating padding.
2. Curtain 2 aluminum (type 2-side):
And some form of contour typical for this system:
This structure is also commonly used in buildings ranging from small, medium and large, the model structure consisting of two outside looking in glue and 2 aluminum, differentiate between different panels, you can options for horizontal glue lines or elevation, we recommend using glue to the road surface level, but if you choose face adhesive for vertical lines like the above model, we'll offer you solutions to avoid as well as dust deposition at the location bar, we also offer a solution for you to use the problem of heat transfer from the outside environment and vice versa in order to avoid loss of energy for your work.
3. 4 Curtain adhesive surface (type hide):
And some form of contour typical for this system:
From the outside of your work, you probably will not see the glass panel dividing the frame, and viewed from far away so if you can work just like a giant shield. This structure has advantages compared with the structure introduced by the divider has no frame so you can unleash decorate the landscape outside your home, you can use a variety of glass to form of advertising, or the box your desired color.
In addition we mention we also have audio systems retaining wall decoration (decoration, alum.dec ...) and no bar decoration.
Diversity of primary aluminum and glass color scheme or other accessories to give up on the wall properties are not usually compared. retaining wall products to ensure our tolerance for vibration, acoustic ability, insulation, longevity, durability, pretty high.
If the classification method of assembly can include separate systems installed by type (stick system) and built each cell type (unit system), for both types of intermediate (Sumi-system). It is also quite common classifications in the construction industry. On the classification of this type you can refer to the article the basic aspects of our building (a general introduction to face up)
Downstream of this I would like details of how the different assembly methods:
You refer to a type of building our presence:
This is a 4-sided adhesive (type hide) and assembled in the form of each individual bar (stick system) or combinations (Sumi-system).
This kind of method can be assembled as follows: after joining the bar or a box of prefabricated parts (unit system), the rest will be assembled to complete:
|